skip to main text

Setting Items for Copying

You can change the copy settings such as the page size, media type, and intensity.

In the copy mode, press the Menu button, use the LEFTRIGHT button to select a setting item, then press the OK button.

Use the LEFTRIGHT button to adjust each setting item, then press the OK button. The next setting item is displayed.

The LCD returns to the Copy standby screen when all the settings are complete.

Note

  • The (asterisk) on the LCD indicates the current setting.

  • Some settings cannot be specified in combination with the setting of other setting items or the copy menu.

  • The settings of the page size, media type, etc. are retained even if the printer is turned off.

  • Enlarge/Reduce

    Select the reduction/enlargement method.

    Ex:

    figure: LCD

    Note

    • This setting item is displayed under the following conditions.

      • When standard copying is selected

      • When Borderless copy is selected for Special copy

  • Copy intensity

    Change the intensity.

    Ex:

    figure: LCD

    Note

    • If you select Auto adjust, load the original on the platen glass.

    • If you select Manual adjust, use the LEFT button to decrease the intensity or the RIGHT button to increase it.

  • Page size

    Select the page size of the loaded paper.

    Ex:

    figure: LCD

    Note

    • Some of setting items are not available depending on the country or region of purchase.

  • Media type

    Select the media type of the loaded paper.

    Ex:

    figure: LCD
  • Print quality

    Select the print quality according to the original.

    Ex:

    figure: LCD

    Note

    • If you use Draft with the media type set to Plain paper and the quality is not as good as expected, select Standard or High and try copying again.

    • Select High to copy in grayscale. Grayscale renders tones in a range of grays instead of black or white.

  • 4-on-1 layout

    Select the layout when copying four original pages onto a single sheet of paper by reducing each image. Four different layouts are available.

    Ex:

    figure: LCD

    Note

  • Collate

    Select whether to obtain sorted printouts when making multiple copies of a multi-paged original.

    Ex:

    figure: LCD

    Note

    • This setting item is displayed when standard copying is selected.